Din hobby pentru electronice
English  

Vizitatori online

In prezent sunt 31 vizitatori si 
1 membru online.

Electronic brick - Buzzer


8,93RON cu TVA


Modul Buzzer, compatibil cu platforma de dezvoltare Arduino (sau clona).

 Electronic Brick

Arduino and community have made the programming much easier than ever before. How about some elixir on hardware part? Maybe it is not yet convenient to make complex interfaces, but we can at least start from the most commonly used modules.

By using electronic bricks, you may connect Arduino compatible boards easily with various digital, analog and I2C/Uart interfaces. These the breadboard-less firm connection are prepared to extensive modules like poteniometers, sensors, relays, servos...even buttons, just plug and play. 

Each terminal module has buckled port with VCC, GND and Output, which has corresponding port on the sensing board, with a plain 2.54mm dual-female cable you may start playing already. Buckled brick cables are like cement for bricks, make the connections easier, secure and more professional looking.

 

EB

 

 Overview

This is a simple yet enjoyable electronic brick to use. The piezo can be connected to digital outputs, and will emit a tone when the output is high. Alternatively it can be connected to an analog pulse-width modulation output to generate various tones and effects.

When you connect the - pins to GND, digital I/O output to S pin. When output is in the high level, the buzzer is on and when output is in the low level, the buzzer is off.

 

Programming

1
2
3
4
5
6
7
8
9
10
11
12
void setup()
{
 pinMode(6, OUTPUT);
}
 
void loop()
{
 digitalWrite(6, HIGH);
 delay(analogRead(0));
 digitalWrite(6, LOW);
 delay(analogRead(0));
}
 

Specification

Brick Type:  Light and Sound
Brick Interface:  3PIN
Brick Power Supply:  5V
Board Size:  37 × 21 × 1.6mm
Weight:  20.00g
  • 11 Bucati in stoc

Fii primul care scrie un review.  Scrie un review de produs.

Produsul a fost adaugat in data de Monday 07 May, 2012.